With the development of artificial intelligence technology, in order to meet the needs of flexibility and automation development of manufacturing production, the degree of intelligence of fully automated cnc machines is also constantly improving. Hard rail CNC lathe is a kind of machine tool with high automation degree and high efficiency. Equipped with multi-station tower or power tower, the machine tool has a wide range of processing technology performance, can process linear cylinder, oblique cylinder, arc and a variety of threads, slots, worm gear and other complex workpieces, but also has linear interpolation, arc interpolation of various compensation functions, and in the mass production of complex parts has played a good economic effect. So what conditions do this lathe need to meet when processing? There are roughly four:

1, temperature requirements: suitable temperature;

2. Instructions for the use of the machining center: When using the machining center, the user shall not arbitrarily change the setting parameters in the control system. The setting of these parameters is directly related to the dynamic characteristics of each component. Only the gap compensation parameters can be adjusted according to the actual situation.

3, machining center location environmental requirements: machining center location can not have vibration source, can not have direct sunlight, can not have thermal radiation, can not have moisture, can not have airflow. If there is a vibration source near the NC machining center, an anti-vibration ditch should be set up around it. In CNC machining centers, poor contact and failure of electronic components are important factors affecting machining accuracy and stability, and also important factors affecting the reliability of machining centers.

4, power supply requirements: under normal circumstances, the processing center is located in the processing workshop, the ambient temperature fluctuations are large, the working conditions are poor, and there are more various types of mechanical and electrical equipment, resulting in greater fluctuations in the power grid. Therefore, the installation position of the machining center needs to have strict control of the power supply voltage. The fluctuation of the power supply voltage should be controlled within the allowable range and maintain relative stability. Otherwise, the normal operation of the NC system of the machining center will be affected.

fully automated cnc machines https://www.zjshuangzheng.com/Automatic-CNC-Machine-ES36.html